MikroTik Routerboard
Authorized Distributor & Reseller


Metal 5SHPn


The new, completely waterproof, rugged, and super high powered RouterBOARD Metal. The serious outdoor wireless device!

Fully sealed, industrial design metal case, powered by RouterBOARD and RouterOS. 1300mW of output power - to reach the last mile, in any conditions! It comes with L4 license, so you can attach your favorite 5Ghz antennna to use it as an AP, to make wireless point-to-point links or as a CPE- whatever you prefer!

It has a built-in N-male connector, and pole attachment points, so you can attach it to an antenna directly, or use a standard antenna cable. LED signal indicators make it easy to install and align.

Package contains Metal-5SHPn, mounting loops, PoE injector, power adapter

Product specifications

Details
Product code RBMetal5SHPn
CPU nominal frequency 400 MHz
CPU core count 1
Architecture MIPS-BE
Size of RAM 64 MB
10/100 Ethernet ports 1
10/100/1000 Ethernet ports 0
MiniPCI slots 0
MiniPCI-e slots 0
Wireless chip model AR9280-AL1A
Wireless standards 802.11a/n
Number of USB ports 0
Power Jack No
802.3af support No
PoE 8-30V DC
Voltage Monitor Yes
PCB temperature monitor Yes
CPU temperature monitor No
Dimensions 177x44x44mm, 193g
Operating System RouterOS v5
Operating temperature range -30C to +70C
License level Level4
Current Monitor No
TX power 31dBm
CPU AR7241-AH1A
Max Power consumption 11.5W
SFP ports 0
Number of chains 1
   

Included parts

Performance test results

RBMetal5SHPn (400Mhz) Gigabit port test RouterOS
Mode Configuration 64 byte 512 byte 1518 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 194.0 127.3 178.4 756.6 81.2 997.8
Bridging 25 bridge filter rules 53.7 35.2 52.3 221.9 51.5 633.0
Routing none (fast path) 183.7 120.5 167.0 708.1 81.2 997.8
Routing 25 simple queues 92.8 60.8 88.5 375.1 81.2 997.8
Routing 25 ip filter rules 37.5 24.6 38.4 162.6 37.6 462.4
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results