MikroTik Routerboard
Authorized Distributor & Reseller


RB951Ui-2HnD


The RB951Ui-2HnD is a wireless SOHO AP with a new generation Atheros CPU and more processing power. It has five Ethernet ports, one USB 2.0 port and a high power 2.4GHz 1000mW 802.11b/g/n wireless AP with antennas built in.

It has a 600MHz CPU,128MB of RAM and PoE output function for port #5 - it can power other PoE capable devices with the same voltage as applied
to the unit. Maximum load on the port is 500mA.

Package contains RouterBOARD 951Ui-2HnD in a plastic case and power adapter.

Product specifications

Details
Product code RB951Ui-2HnD
CPU nominal frequency 600 MHz
CPU core count 1
Size of RAM 128 MB
10/100 Ethernet ports 5
10/100/1000 Ethernet ports 0
MiniPCI slots 0
MiniPCI-e slots 0
Wireless chip model AR9344-DC3A
Wireless standards 802.11b/g/n
Number of USB ports 1
Power Jack Yes
802.3af support No
PoE 8-30V DC on Ether1
Voltage Monitor No
CPU temperature monitor No
PCB temperature monitor No
Dimensions 113x138x29mm
Operating System RouterOS
Operating temperature range -20C +50C
License level L4
Antenna gain DBI 2.5dBi
Current Monitor No
TX power 30dBm
CPU AR9344-DC3A
Max Power consumption Up to 7W
SFP ports 0
USB slot type USB type A
Number of chains 2
   

Included parts

Performance test results

RB951Ui-2HnD (600Mhz) 100M port test RouterOS
Mode Configuration 64 byte 512 byte 1518 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 269.6 176.9 116.5 494.0 40.0 491.5
Bridging 25 bridge filter rules 87.6 57.5 86.0 364.6 40.0 491.5
Routing none (fast path) 226.9 148.8 116.5 494.0 40.0 491.5
Routing 25 simple queues 106.6 69.9 103.9 440.5 40.0 491.5
Routing 25 ip filter rules 60.5 39.7 59.6 252.7 40.0 491.5
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results