MikroTik Routerboard
Authorized Distributor & Reseller


RB2011iL-RM


The RB2011 is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options.

The RB2011 is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring - just a few of the vast number of features supported by RouterOS.

The RB2011iL-RM includes a new feature - power injector on Ethernet port 10 - it can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! Maximum load on the port is 500mA. It is powered by the new Atheros 600MHz 74K MIPS network processor, has 64MB of RAM and a Level4 RouterOS license, as well as five Gigabit Ethernet ports and five Fast Ethernet ports for unbeliveable USD 99!

RouterBOARD 2011iL-RM comes with 1U rackmount enclosure and power supply.

Product specifications

Details
Product code RB2011iL-RM
CPU nominal frequency 600 MHz
CPU core count 1
Size of RAM 64 MB
Architecture MIPS-BE
10/100 Ethernet ports 5
10/100/1000 Ethernet ports 5
MiniPCI slots 0
MiniPCI-e slots 0
Number of USB ports 0
PoE 8-30V
Voltage Monitor No
CPU temperature monitor No
PCB temperature monitor No
Operating temperature range -35C to +65C
License level L4
Current Monitor No
CPU AR9344-DC3A-R
Max Power consumption 6W
SFP ports 0
SFP+ ports 0
Number of chains 0
   

Included parts

Performance test results

RB2011iL-RM (600Mhz) 100M & 1G port test RouterOS
Mode Configuration 64 byte 512 byte 1518 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 269.6 176.9 232.0 983.7 122.0 1,499.1
Bridging 25 bridge filter rules 87.6 57.5 86.0 364.6 83.6 1,027.3
Routing none (fast path) 226.9 148.8 210.0 890.4 122.0 1,499.1
Routing 25 simple queues 106.6 69.9 103.9 440.5 100.5 1,234.9
Routing 25 ip filter rules 60.5 39.7 59.6 252.7 56.8 698.0
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results