MikroTik Routerboard
Authorized Distributor & Reseller


RB2011UiAS-IN


The RB2011 is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options.

The RB2011 is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring - just a few of the vast number of features supported by RouterOS.

RouterBOARD 2011UiAS-IN, in comparison with RB2011L series, not only has five Gigabit LAN ports and five Fast Ethernet LAN ports, but also has RJ45 serial port, microUSB port and more RAM (128MB instead of 64MB). Also, it has RouterOS L5 license (instead of L4) and nice touchscreen LCD for configuration. SFP cage is also present (SFP module not included!)

Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included)

There is PoE output function for port #10 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA.

RouterBOARD 2011UiAS-IN comes with desktop enclosure, LCD panel and power supply.

Wall mount kit (product code RBWMK) for network closet is available for purchase as an optional accessory.

Product specifications

Details
Product code RB2011UiAS-IN
SFP DDMI Yes
CPU nominal frequency 600 MHz
CPU core count 1
Size of RAM 128 MB
10/100 Ethernet ports 5
10/100/1000 Ethernet ports 5
MiniPCI slots 0
MiniPCI-e slots 0
Number of USB ports 1
Power Jack 8-28V DC
802.3af support No
PoE 8-28V DC on Ether1
Voltage Monitor Yes
PCB temperature monitor Yes
CPU temperature monitor No
Dimensions 214mm x 86mm for PCB
Operating System RouterOS
Operating temperature range -35C to +65C
License level L5
Current Monitor No
CPU AR9344-BC2A
SFP ports 1
SFP+ ports 0
USB slot type microUSB type AB
Number of chains 0

Included parts

Performance test results

RB2011UiAS-IN (600Mhz) 100M & 1G port test RouterOS
Mode Configuration 64 byte 512 byte 1518 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 269.6 176.9 232.0 983.7 122.0 1,499.1
Bridging 25 bridge filter rules 87.6 57.5 86.0 364.6 83.6 1,027.3
Routing none (fast path) 226.9 148.8 210.0 890.4 122.0 1,499.1
Routing 25 simple queues 106.6 69.9 103.9 440.5 100.5 1,234.9
Routing 25 ip filter rules 60.5 39.7 59.6 252.7 56.8 698.0
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results