MikroTik Routerboard
Authorized Distributor & Reseller


RB411AR


The RB411AR has an integrated 802.11b/g wireless card with MMCX conenctor.

Not only you have a readymade wireless solution, but also you have a spare miniPCI card slot for your choice of another wireless card!

With this device you can connect to a remote AP and serve your local area with internet both at the same time!

It has the same familiar footprint as the other RB411 series devices, which means you can mount it into any supported outdoor enclosure, and upgrading to this model will take just minutes.

Product specifications

Details
Product code RB411AR
CPU nominal frequency 300 MHz
CPU core count 1
Size of RAM 64 MB
Architecture MIPS-BE
10/100 Ethernet ports 1
10/100/1000 Ethernet ports 0
MiniPCI slots 1
MiniPCI-e slots 0
Wireless chip model AR2417-AL1A
Wireless standards 802.11b/g
Number of USB ports 0
Memory Cards 0
Power Jack 10-28V
802.3af support No
PoE 10-28V
Voltage Monitor Yes
CPU temperature monitor No
PCB temperature monitor No
Operating temperature range -30C to +60C
License level Level4
Current Monitor No
CPU AR7130-BC1A
SFP ports 0
SFP+ ports 0
Number of chains 1

Performance test results

RB411AR (300Mhz) One 100M port test RouterOS
Mode Configuration 64 byte 512 byte 1518 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none 97.3 63.8 23.5 99.6 8.1 99.8
Bridging 25 bridge filter rules 41.0 26.9 23.5 99.6 8.1 99.8
Routing none 79.4 52.1 23.5 99.6 8.1 99.8
Routing 25 simple queues 67.8 44.5 23.5 99.6 8.1 99.8
Routing 25 ip filter rules 24.7 16.2 23.5 99.6 8.1 99.8
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results