MikroTik Routerboard
Authorized Distributor & Reseller


RB433


Three miniPCI slots and three Ethernet ports give you enough connectivity options to use the RB433 as the central part of your network.

A wireless repeater plus a local access point, or an AP with multiple sectors - it’s all up to you, all of it is made possible by the RB433.

Product specifications

Details
Product code RB433
CPU nominal frequency 300 MHz
CPU core count 1
Architecture MIPS-BE
Size of RAM 64 MB
10/100 Ethernet ports 3
10/100/1000 Ethernet ports 0
MiniPCI slots 3
MiniPCI-e slots 0
Wireless chip model None
Number of USB ports 0
Memory Cards 0
Power Jack 10-28V
802.3af support No
PoE 10-28V
Voltage Monitor No
PCB temperature monitor No
CPU temperature monitor No
Operating temperature range -30C to +60C
License level Level4
Current Monitor No
CPU AR7130-BC1A
SFP ports 0
   

Performance test results

RB433 (300Mhz) 100M port test RouterOS
Mode Configuration 64 byte 512 byte 1518 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none 97.3 63.8 47.0 199.3 16.2 199.1
Bridging 25 bridge filter rules 41.0 26.9 40.6 172.1 16.2 199.1
Routing none 79.4 52.1 47.0 199.3 16.2 199.1
Routing 25 simple queues 67.8 44.5 47.0 199.3 16.2 199.1
Routing 25 ip filter rules 24.7 16.2 28.9 122.5 16.2 199.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results