MikroTik Routerboard
Authorized Distributor & Reseller


RB433GL


The RB433GL has three miniPCI slots, three Gigabit Ethernet ports and one USB port for storage or a 3G modem.

Three Gigabit Ethernet ports and three miniPCI slots gives you plenty of options- it can be high speed Gigabit Router, sector AP, wireless backhaul, firewall etc. Powerful Atheros 680MHz CPU, 128MB of RAM and Level5 RouterOS license provides required horsepower.

Differences between RB433GL and RB433AH can be seen in the file (RB411L differences) in the left hand menu.

Product specifications

Details
Product code RB433GL
CPU nominal frequency 680 MHz
CPU core count 1
Architecture AR7161
Size of RAM 128 MB
10/100 Ethernet ports 0
10/100/1000 Ethernet ports 3
MiniPCI slots 3
MiniPCI-e slots 0
Number of USB ports 1
Power Jack Yes
802.3af support No
PoE 8-28V DC on Ether1
Voltage Monitor Yes
CPU temperature monitor No
PCB temperature monitor No
Dimensions 105 mm x 154 mm,
Operating System RouterOS
Operating temperature range -30C to +60C
License level Level5
Current Monitor No
CPU AR7161-BC1A
SFP ports 0
USB slot type USB type A
Number of chains 0
   

Performance test results

RB433GL (680Mhz) Gigabit port test RouterOS
Mode Configuration 64 byte 512 byte 1518 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none 187.3 122.9 171.9 728.9 58.0 712.7
Bridging 25 bridge filter rules 86.4 56.7 84.5 358.3 58.5 718.8
Routing none 147.0 96.4 136.1 577.1 59.7 733.6
Routing 25 simple queues 137.0 89.9 117.7 499.0 55.2 678.3
Routing 25 ip filter rules 59.2 38.8 59.4 251.9 54.7 672.2
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results