MikroTik Routerboard
Authorized Distributor & Reseller


RB433UAH


Three miniPCI slots and three Ethernet ports give you enough connectivity options to use the RB433UAH as the central part of your network. In addition to our regular model, the UAH version adds more RAM, our popular high-speed Atheros 680MHz CPU, a microSD card slot and two USB 2.0 ports, making this the perfect universal choice for serious networks.

The two USB 2.0 ports can be used for extending storage, adding a 3G wireless modem for backup connectivity or for a mobile installation, or all together.

A microSD card gives you the ability to add more storage for Webproxy cache, logs, or Metarouter virtual machines.

Product specifications

Details
Product code RB433UAH
CPU nominal frequency 680 MHz
CPU core count 1
Architecture MIPS-BE
Size of RAM 128 MB
10/100 Ethernet ports 3
10/100/1000 Ethernet ports 0
MiniPCI slots 3
MiniPCI-e slots 0
Wireless chip model None
Number of USB ports 2
Memory Cards 1
Memory card type microSD
Power Jack 10..28V
802.3af support No
PoE 10..28V
Voltage Monitor Yes
PCB temperature monitor No
CPU temperature monitor No
Dimensions 105x150mm, 140g
Operating temperature range -30C to +60C
License level Level5
Current Monitor No
CPU AR7161-BC1A
SFP ports 0
USB slot type USB type A
   

Performance test results

RB433UAH (680Mhz) 100M port test RouterOS
Mode Configuration 64 byte 512 byte 1518 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none 187.3 122.9 47.0 199.3 16.2 199.1
Bridging 25 bridge filter rules 86.4 56.7 47.0 199.3 16.2 199.1
Routing none 147.0 96.4 47.0 199.3 16.2 199.1
Routing 25 simple queues 137.0 89.9 47.0 199.3 16.2 199.1
Routing 25 ip filter rules 59.2 38.8 47.0 199.3 16.2 199.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results