MikroTik Routerboard
Authorized Distributor & Reseller


SXT Lite2


Our best price/performance 2.4Ghz CPE. The SXT Lite2 (product code RBSXT2nDr2), 2Ghz 10dBi integrated antenna with 600MHz CPU, 64MB RAM and RouterOS L3 installed.

SXT Lite2 is a low cost, high transmit power 2.4GHz (2312 -2732MHz depending on country regulations) outdoor wireless device. It can be used for point to point links or as a CPE for point to multipoint installations.

Product specifications

Details
Product code RBSXT2nDr2
CPU nominal frequency 600 MHz
CPU core count 1
Size of RAM 64 MB
10/100 Ethernet ports 1
10/100/1000 Ethernet ports None
MiniPCI slots 0
MiniPCI-e slots 0
Wireless chip model AR9344-DC3A
Wireless standards 802.11b/g/n
Number of USB ports 0
Power Jack 0
802.3af support 0
PoE 8-30V DC
Voltage Monitor No
CPU temperature monitor No
PCB temperature monitor No
Dimensions 140x140x56mm
Operating System RouterOS
Operating temperature range -30C .. +80C
License level L3
Antenna gain DBI 10dBi
Current Monitor No
TX power 27dBm
CPU AR9344-DC3A
Max Power consumption Up to 8W
SFP ports 0

Included parts

Performance test results

RBSXT2nDr2 (600Mhz) One 100M port test RouterOS
Mode Configuration 64 byte 512 byte 1518 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 148.0 97.1 23.5 99.6 8.1 99.5
Bridging 25 bridge filter rules 87.6 57.5 23.5 99.6 8.1 99.5
Routing none (fast path) 148.0 97.1 23.5 99.6 8.1 99.5
Routing 25 simple queues 106.6 69.9 23.5 99.6 8.1 99.5
Routing 25 ip filter rules 60.5 39.7 23.5 99.6 8.1 99.5
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results