MikroTik Routerboard
Authorized Distributor & Reseller


SXT SA


SXTG-5HPnD-SAr2 is a low cost, high speed 5GHz outdoor wireless sector access point. It has a 90 degree antenna to provide a wider coverage than our previous SXT units.

Complete with a ready to mount enclosure and built-in 14dBi antenna, the package contains everything you need to set it up in a matter of minutes. The inside of the case is covered in special shielding to improve operation in high interference areas and antenna front to back ratio.

Box contains: SXT wireless device with integrated antenna, pole mounting bracket, mounting ring, PoE injector, power adapter, quick setup guide

Product specifications

Details
Product code RBSXTG-5HPnD-SAr2
CPU nominal frequency 600 MHz
CPU core count 1
Size of RAM 64 MB
10/100 Ethernet ports 0
10/100/1000 Ethernet ports 1
MiniPCI slots 0
MiniPCI-e slots 0
Wireless chip model AR9344-BC2A
Wireless standards 802.11a/n
Number of USB ports 1
802.3af support No
PoE 8-30V DC
Voltage Monitor Yes
PCB temperature monitor Yes
CPU temperature monitor No
Dimensions 140x140x56mm
Operating System RouterOS
Operating temperature range -30C .. +80C
License level L4
Antenna gain DBI 14dBi
Current Monitor No
TX power 30dBm
CPU AR9344-BC2A
Max Power consumption Up to 7W
SFP ports 0
USB slot type USB type A
Number of chains 2

Included parts

Performance test results

RBSXTG-5HPnD-SAr2 (600Mhz) Gigabit port test RouterOS
Mode Configuration 64 byte 512 byte 1518 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 269.6 176.9 232.0 983.7 81.0 995.3
Bridging 25 bridge filter rules 87.6 57.5 86.0 364.6 81.0 995.3
Routing none (fast path) 226.9 148.8 210.0 890.4 81.0 995.3
Routing 25 simple queues 106.6 69.9 103.9 440.5 81.0 995.3
Routing 25 ip filter rules 60.5 39.7 59.6 252.7 56.8 698.0
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results