MikroTik Routerboard
Authorized Distributor & Reseller


Our fastest router has now become even better - the new CCR1036-8G-2S+ now has two SFP+ ports for 10G interface support (SFP+ module available separately). It uses the same 36 core Tilera CPU as our other CCR1036 model, and delivers the same performance, but now, ten gigabit links are possible.

The device comes in a 1U rackmount case, has two SFP+ ports, eight Gigabit ethernet ports, a serial console cable and a USB port.

The CCR1036-8G-2S+ has two SODIMM slots, by default it is shipped with 4GB of RAM, but has no memory limit in RouterOS (will accept and utilize 16GB or more). Also available now, the EM model with 16GB of RAM!

Product specifications

Product code CCR1036-8G-2S+
CPU nominal frequency 1.2 GHz
CPU core count 36
Size of RAM 4 GB
Architecture TILE
10/100 Ethernet ports 0
10/100/1000 Ethernet ports 8
MiniPCI slots 0
MiniPCI-e slots 0
Number of USB ports 1
Memory Cards 1
Memory card type microSD
Power Jack C14
Voltage Monitor Yes
CPU temperature monitor Yes
PCB temperature monitor Yes
Dimensions 355x145mm55mm
Operating System RouterOS
Operating temperature range -30C to +60C
License level L6
Current Monitor Yes
CPU TLR4-03680CG-12C
SFP ports 0
SFP+ ports 2
USB slot type microUSB type AB
Number of chains 0

Included parts

Performance test results

CCR1036-8G-2S+ (1200Mhz) All port test RouterOS
Mode Configuration 64 byte 512 byte 1518 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 41,636.0 27,313.2 6,574.0 27,873.8 2,274.0 27,942.9
Bridging 25 bridge filter rules 5,817.0 3,816.0 5,630.0 23,871.2 2,274.0 27,942.9
Routing none (fast path) 41,636.0 27,313.2 6,574.0 27,873.8 2,274.0 27,942.9
Routing 25 simple queues 7,782.0 5,105.0 6,574.0 27,873.8 2,274.0 27,942.9
Routing 25 ip filter rules 3,081.0 2,021.1 2,796.0 11,855.0 2,274.0 27,942.9
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results